News
Current Position： Home
> News
What should be checked before the mold temperature machine is started?
announcer：
Regarding the inspection before the mold temperature machine is started, first of all, we actually need to pay attention to whether it is clean and free of debris. Next, we actually need to pay attention to check its power supply, heater and its controller, Is the pressure gauge and pumps normal? After confirming that the components of the mold temperature machine are normal, we actually want to check the other components.
Check whether the oil level of the expansion oil tank of the mold temperature machine will be at a position above the 1/2-3/5 liquid level. Next, we actually want to see whether its liquid level sensor is normal; After the power supply on the control cabinet, we actually need to pay attention to check whether the voltage is normal, and then, we also need to pay attention to check whether the indicator light and its various display instruments are normal.
When the mold temperature machine is started, first of all, we actually need to pay attention to that it should start its thermal oil circulation pump. After starting the pump, it will actually circulate normally for about 0.5 hours. In fact, it can keep the pressure stable to a certain extent; then, we actually need to start its button according to the heating, and then we must observe whether the heating is normal.
Regarding the shutdown operation of the mold temperature machine, it actually includes the normal shutdown. First of all, we actually should gradually reduce its temperature, and then, in fact, we should pay attention to that we should stop heating; When the temperature of the heat transfer oil drops below 70℃, it is necessary to stop the operation of the heat transfer oil circulation pump.
Next, when the mold temperature machine is shut down, we actually need to pay attention to the need to turn off the main power supply, and then, in fact, it is necessary to make a handover record. When the mold temperature machine is shut down in an emergency, in fact, it will be shut down quickly due to an emergency situation. At this time, it will actually facilitate the natural cooling of the thermal oil and prevent it from overheating. .