News
Current Position： Home
> News
Preventive Measures for Fire Accidents Occurred in Heat-conducting Oil Furnace of Gas Mold Temperature Machine
announcer：
When it comes to preventing fire accidents in the heat conduction oil furnace of the gas mold temperature machine, first of all, we actually have to pay attention to the fact that once the heat conduction oil leaks from the heating system of the gas heat conduction oil furnace, because of its own The temperature is relatively high, and the flame is directly contacted or approached to a large extent, the heat transfer oil of the gas mold temperature machine will be ignited or spontaneously ignite, thereby causing a fire.
In addition, in the heat conduction oil furnace of the gas mold temperature machine, in fact, there will be a series of reasons such as water in the heat conduction oil system, and the oil injection or even a series of explosion accidents directly occur. When we take precautions against gas heat conduction oil furnace accidents, we must proceed from both the equipment and the medium at the same time. A tan makes the equipment itself have sufficient strength and its tightness, and it will not break.
What we will talk about next is that we should pay attention to it. When it is actually used, it means that the heat transfer oil will not be overheated or deteriorated during heating. We should pay attention to normal flow and heat exchange.
The preventive measures for fire accidents of the heat conduction oil furnace of the gas mold temperature machine, first of all, the gas heat conduction oil furnace used should be a qualified product of the national designated manufacturer. Next, the installation of the gas heat conduction oil furnace heating system should actually be completed by the manufacturer or a fixed-point installation unit, and its quality must be qualified and it must meet the relevant regulations before it can be used.
The supply unit of the thermal oil for the gas mold temperature machine should be able to provide the physical and chemical performance data of the thermal oil itself, and in terms of another aspect, it should actually meet the requirements of national standards. The heat conducting oil should be tested once a year when it is used. When there is a problem with the heat conduction oil of the gas mold temperature machine, we should carry out timely replacement or regeneration.