兽皇videos极品另类,亚洲av永久无码精品天堂动漫,最近免费中文字幕大全高清10,性无码专区无码

News

Current Position: Home > News
Precautions and maintenance of mold temperature machine during use
announcer:admin
The mold temperature machine consumes a large amount of electrical energy in the process of use, which is very important for building an energy-saving enterprise and saving enterprise costs. Where are the main power consumption of the mold temperature machine and whether there is a solution. When using the mold temperature machine, after setting a certain temperature required by the process, the mold temperature machine has been running and will consume a lot of electrical energy. At the same time, the contactor pulls in and disconnects very frequently, which can cause the heating tube, contactor, or even fire. These should be paid attention to in the process of using the mold temperature machine.
There are two main power-consuming components of the mold temperature machine, one is the circulation pump, and the other is the electric heating tube. The mold temperature machine only consumes more power during the previous heating process, because the higher heat of the alloy brought into the mold will cause the die casting mold temperature to rise, so in the later normal production, the heating part of the mold temperature machine only plays a role in temperature regulation. Not always in the heated state but in the state of heat preservation or cooling.
When the mold temperature machine is running normally, the circulating pump is always in working state, and its power consumption per hour is the pump power. For example, the working power of the pump is 1KW, and its power consumption is 1Kw/h. The electric heating tube is not always working. In the later stage of maintaining constant temperature, the power consumption is the heating power of the electric heating tube. The power consumption is between 1/3~2/3 of the electric heating tube power. If economically allowed, it is recommended that the electric heating tube be controlled by thyristor, which can control the power consumption to a small level.
In addition, the frequent pull-in of the contactor of the mold temperature machine may cause the contactor to be stuck and cause constant heating. It may be recommended to use a solid-state relay or thyristor control. As for causing fire, it depends on whether the die-casting mold temperature machine manufacturer has made over-temperature protection measures, such as the use of over-temperature protection. After the set temperature is exceeded, the whole machine is powered off to reduce the possibility of fire.

Maintenance of mold temperature machine
1. After purchasing a new mold temperature machine, please check whether the cooling water is circulating before use to prevent damage to the mold temperature machine due to insufficient cooling water. We must keep the working environment of the mold temperature machine clean and avoid dust, which can greatly extend the service life of the electrical components of the mold temperature machine.
2. For the new mold temperature machine, we need to make different maintenance measures according to the heat conduction medium used. If the medium is water, we must keep the water source clean, so that it is not easy to scale, and it can also prevent the pipeline from being blocked. If the medium is oil, we need to replace it regularly according to the temperature of use. For the temperature above 200 ℃, we need to replace it once a month or two, and below 200 ℃, we can replace it once a quarter, so it is very easy to avoid The problem that the temperature cannot be increased.
3. In terms of piping, we need to judge whether the piping is clogged according to the relationship between pump and pressure. If the pressure is too low, we can take out the heating pipe and clean it with tools, especially the filter mesh at the entrance of the system Cover, clean once a month.
4. Regularly check the mold temperature machine water pump and oil pump for oil leakage. If necessary, the pump shaft seal can also be replaced regularly.
5. On electrical components, we can replace them in time according to the service life of the components and test them regularly to ensure safety.
欧美国产成人精品二区芒果视频| 久久久久人妻一区二区三区vr| 亚洲中文在线精品国产| 精品国产亚洲一区二区三区| 麻豆国产96在线日韩麻豆| 99久久精品这里只有精品| 精品无码日韩国产不卡AV| 好深好大好长好爽18禁| 女人18毛片水真多免费看| 久久影院午夜理论片无码| 又爽又黄又无遮挡的视频美女| 女被男啪到哭的视频网站| 亚洲av成人无码久久精品老人| 亚洲国产精品久久久久久| 国产人妖XXXX做受视频| 精品一区二区三区在线观看| 国产热A欧美热A在线视频| 色综合久久久无码中文字幕波多| 777国产偷窥盗摄精品品在线| 男女啪啪免费体验区| 狠狠躁夜夜躁人人躁婷婷视频| 67194熟妇在线观看线路1| 中文在线8资源库| 国产白袜脚足J棉袜在线观看| 亚洲情综合五月天| 亚洲欧洲无卡二区视頻| 牲欲强的熟妇农村老妇女视频| 日韩经典午夜福利发布| 四虎国产精品永久地址入口| 中国少妇内射XXXX狠干| 国精品午夜福利视频| AV鲁丝一区鲁丝二区鲁丝三区| 中文字幕日本六区小电影| 免费国产高清在线精品一区| 午夜大片爽爽爽免费影院| 无码一区二区三区不卡AV| 亚洲AV永久无码精品网站| 欧美熟妇乱子伦XX视频| 高清一区二区三区日本久| 日本一卡2卡3卡4卡5卡精品视频| 婷婷伊人久久大香线蕉av|